Add Job Code

Use the Add Job Code screen to create a new job code. See also John Deere Machine ID.

The Add Job Code screen is accessed from the Job Codes screen by clicking the Need to create a job code? Click here to add link.

Topics in this section are:

Adding a Job Code

  1. Navigate to Product Support > Service > Job Codes.

    Job Codesscreen appears.

  2. Click the Need to create a job code? Click here to add link.

  3. Fill in the fields referring to the table below.

  4. Click Save.

    Profile tab appears.

  5. On the Profile tab, enter or select any additional information related to the job code and its status.

  6. Complete the profile by adding additional information about the parts required for the job to the Parts List and Add Ons tabs as desired.

  7. Click Save to record the job code entry.
    - or -
    Click Close to exit the Profile tab without saving any of the information.

Screen Description

Fields on the Add Job Code screen are:

Field Description
Job Code Number

Enter a number to represent this job code.

The system does not automatically generate a new job code number. You must enter a unique number that represents the job code throughout the system. However, you can reuse a job code number on multiple job codes as long as the model number on each job code is different.
Make The manufacturer of the unit/machine that this job code applies to.
Model The model number on the unit/machine that this job code applies to.
Hours The total number of labor hours that should be spent performing this repair.
Description A brief description of the job code.

Buttons on the Add Job Code screen are:

Button Description
Save Saves changes made to the Add Job Code screen.
Close Closes the Add Job Code screen without saving and returns to the Job Codes screen.

Data Source: FLATRATE

Revision: 2026.01